Posted by [IP Address: 216.79.105.24] 'KeithS' on January 08, 2001 at 18:34:02 EST:
In Reply to: Re: r2 to r3 data transfer ....Urgent posted by [IP Address: 216.79.105.24] 'Aldo De Ceulaerde' on January 08, 2001 at 14:05:15 EST:
Aldo is correct, this will work if all you are required to do is transfer data from R2 to R3. If you are required to extract data from the R2 databases it could get more complicated. You could get into a situation where you will need to know the structure of the R2 databases to map the data. And if it happends to be one of those rare IMS R2 systems you might be required to build DBD's and PSB's. Some clients may want you to run the ABAPs and FTP in batch as well, which might require JCL. If you don't have any R2 experience then I would recommend that you find some good R2 folks that you can rely on for advice.
Keith