Re: WF Hangs Attempt to Fire Tcode BD21

[ Follow Ups ] [ Post Followup ] [ Message Board ]

Posted by [IP Address: 195.41.106.3] 'Søren Skjødt' on August 10, 2001 at 06:48:25 EST:

In Reply to: WF Hangs Attempt to Fire Tcode BD21 posted by [IP Address: 195.41.106.3] 'Mike Mitchell' on August 09, 2001 at 18:41:04 EST:

Hi Mike

Have you checked that your event has been generated - check the event trace SWEL (remember to activate event trace SWELS).
If it has been generated, is your workflow then stated as the receiver?
If it is - have you checked the work item report - SWI2_FREQ?

BR
Søren

: We have configured a WF method to trigger program RBDMIDOC (tcode = BD21) based on a create, change, or delete to message type MATMAS (material master). This WF appears to hang for some unknown reason. Please point this WF rookie back on the proper path!

: TIA - Mike

Follow Ups:

Re: WF Hangs Attempt to Fire Tcode BD21 Mike Mitchell 09:28:09 8/10/01 EST (1)
- Re: WF Hangs Attempt to Fire Tcode BD21 Søren Skjødt 15:56:23 8/14/01 EST (0)

Post a Followup

Name:
E-Mail:
Subject:
Message: : Hi Mike : Have you checked that your event has been generated - check the event trace SWEL (remember to activate event trace SWELS). : If it has been generated, is your workflow then stated as the receiver? : If it is - have you checked the work item report - SWI2_FREQ? : BR : Søren : : : We have configured a WF method to trigger program RBDMIDOC (tcode = BD21) based on a create, change, or delete to message type MATMAS (material master). This WF appears to hang for some unknown reason. Please point this WF rookie back on the proper path! : : TIA - Mike