Posted by [IP Address: 193.132.64.161] 'Rev Stephen Mooney' on July 19, 2001 at 06:01:13 EST:

In Reply to: EVENT NOT FIRED! posted by [IP Address: 193.132.64.161] 'POOR man' on July 18, 2001 at 23:03:04 EST:

POOR man wrote:

: 1.set up a change document ZMARA, only one table MARA in it, then genarate it
: 2.set up a subtype ZBUS1001 and create a event 'mara_change'
: 3.run SWED and add one entry
: 4.run SWEC add one entry

: but when i create a material, event 'mara_change' no fired!
: why?

_____________

Check that the requisite data elements in table MARA have the 'change document' flag ticked.

Having said that, one more thought springs to mind:

Change documents are not normally generated for a created document; only once an object exists, and a change is performed, does the change document work.

Every Blessing,

The Reverend Stephen Mooney

Follow Ups:

• BUT....... POOR man 06:51:08 7/19/01 EST (2)
  • Re: BUT....... Rev Stephen Mooney 09:02:28 7/19/01 EST (1)
    • THANKS POOR man 00:51:13 7/20/01 EST (0)

Post a Followup