Re: WF Hangs Attempt to Fire Tcode BD21

[ Follow Ups ] [ Post Followup ] [ Message Board ]

Posted by [IP Address: 217.157.64.138] 'Søren Skjødt' on August 14, 2001 at 15:56:23 EST:

In Reply to: Re: WF Hangs Attempt to Fire Tcode BD21 posted by [IP Address: 217.157.64.138] 'Mike Mitchell' on August 10, 2001 at 09:28:09 EST:

Hi Mike

I assume the task TS91000014 carry out the method of the object
ZBUS1001?
Apparantly the task is started. What does the work item report say about the status of the workflow task (tcode SWI2_FREQ)?
Is it wating, og in error state?

Have you set the task to be a background task? Else it might be waiting for user interaction...

Best regards,
Søren
: Yes Soren, there are events in the trace log as follows:

:
: BUS1001 VIEWCREATED 08/09/2001 15:48:46 TS91000014 SWW_WI_CREATE_VIA_EVENT
:
: BUS1001 VIEWCREATED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT
:
: BUS1001 VIEWCREATED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT
:
: BUS1001 VIEWCREATED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT
:
: BUS1001 VIEWCREATED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT
:
: BUS1001 VIEWCREATED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT
:
: BUS1001 CHANGED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT
:
: BUS1001 STARTMATNRDEL 08/09/2001 15:48:48 TS91000014 SWW_WI_CREATE_VIA_EVENT
:
: BUS1001 STARTPLANTMATNRDE 08/09/2001 15:48:48 TS91000014 SWW_WI_CREATE_VIA_EVENT
: The frequency log shows:

: TS91000014 ALE: Material upd/chg/delete wf task Background step 64

:
: The Task 91000014 has 4 triggering events; Changed, Created, StartMatnrDel, and StartPlantMatnrDel. All of these appear to be firing in succession per the log?

: Here is where it gets confusing - the object ZBUS1001 has method "MaterialALE_OUT" set to run report RBDMIDOC within the ABAP tab. But it does not appear that the ZBUS1001 object has been raised per the event log. If I test this method within SW01, nothing much happens, i.e. no event is written to the logs.

: - Mike

: : Hi Mike

: : Have you checked that your event has been generated - check the event trace SWEL (remember to activate event trace SWELS).
: : If it has been generated, is your workflow then stated as the receiver?
: : If it is - have you checked the work item report - SWI2_FREQ?

: : BR
: : Søren

: :
: : : We have configured a WF method to trigger program RBDMIDOC (tcode = BD21) based on a create, change, or delete to message type MATMAS (material master). This WF appears to hang for some unknown reason. Please point this WF rookie back on the proper path!

: : : TIA - Mike

Follow Ups:

Post a Followup

Name:
E-Mail:
Subject:
Message: : Hi Mike : I assume the task TS91000014 carry out the method of the object : ZBUS1001? : Apparantly the task is started. What does the work item report say about the status of the workflow task (tcode SWI2_FREQ)? : Is it wating, og in error state? : Have you set the task to be a background task? Else it might be waiting for user interaction... : Best regards, : Søren : : Yes Soren, there are events in the trace log as follows: : : : : BUS1001 VIEWCREATED 08/09/2001 15:48:46 TS91000014 SWW_WI_CREATE_VIA_EVENT : : : : BUS1001 VIEWCREATED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT : : : : BUS1001 VIEWCREATED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT : : : : BUS1001 VIEWCREATED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT : : : : BUS1001 VIEWCREATED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT : : : : BUS1001 VIEWCREATED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT : : : : BUS1001 CHANGED 08/09/2001 15:48:47 TS91000014 SWW_WI_CREATE_VIA_EVENT : : : : BUS1001 STARTMATNRDEL 08/09/2001 15:48:48 TS91000014 SWW_WI_CREATE_VIA_EVENT : : : : BUS1001 STARTPLANTMATNRDE 08/09/2001 15:48:48 TS91000014 SWW_WI_CREATE_VIA_EVENT : : The frequency log shows: : : TS91000014 ALE: Material upd/chg/delete wf task Background step 64 : : : : The Task 91000014 has 4 triggering events; Changed, Created, StartMatnrDel, and StartPlantMatnrDel. All of these appear to be firing in succession per the log? : : Here is where it gets confusing - the object ZBUS1001 has method "MaterialALE_OUT" set to run report RBDMIDOC within the ABAP tab. But it does not appear that the ZBUS1001 object has been raised per the event log. If I test this method within SW01, nothing much happens, i.e. no event is written to the logs. : : - Mike : : : : Hi Mike : : : Have you checked that your event has been generated - check the event trace SWEL (remember to activate event trace SWELS). : : : If it has been generated, is your workflow then stated as the receiver? : : : If it is - have you checked the work item report - SWI2_FREQ? : : : BR : : : Søren : : : : : : : We have configured a WF method to trigger program RBDMIDOC (tcode = BD21) based on a create, change, or delete to message type MATMAS (material master). This WF appears to hang for some unknown reason. Please point this WF rookie back on the proper path! : : : : TIA - Mike

[ Follow Ups ] [ Post Followup ] [ Message Board ]