Regarding font size in ABAP list

Development (ABAP Development WorkBench, ABAP/4 programming)

Moderators: Snowy, thx4allthefish, YuriT, Gothmog

Post Reply
Posts: 2
Joined: Fri Sep 08, 2006 6:38 am

Regarding font size in ABAP list

Post by bindu_reddy » Fri Sep 08, 2006 6:48 am

Hi All,

There is a requirement to display A/C details using classical report. there are near about 30 columns and these were arranged in three lines. here the issue is the user wants to get the hard copy of the report. But the font size is very small.

Can we increse the size of the font during printing the list?


Posts: 323
Joined: Thu Aug 18, 2005 5:29 am
Location: Planet Earth

Post by RavekiD » Fri Sep 08, 2006 7:34 am

i guess this question should go to basis guys...
think 1 minute longer

Posts: 468
Joined: Mon Oct 21, 2002 8:28 am
Location: Large Island West Atlantic

Post by Lawlord » Fri Sep 08, 2006 8:12 am

Yes we can provided there are bigger fonts on your system I had a similar requirement recently and some text on the report had to be different from other text I used Print control function and called the bigger font. Remember to turn off print control when you are finished.

The report on screen will not change but the hard copy will have a different font. Have a look in SPAD and Device print control. You may need to discuss with BASIS if you do not find a suitable font.


Post Reply