This website is not affiliated with, sponsored by, or approved by SAP AG.

04 Inspection for Different Production Order Types

Logistics QM

Moderators: Snowy, thx4allthefish, Ha Tran

04 Inspection for Different Production Order Types

Postby PORTLAND » Thu Jul 27, 2017 1:08 pm

Hi Expert(s)

We have 4 different Production Order Types ZPTR, ZPSP, ZPRW and ZPTS.
Manufacture for a material can be undertaken on any of the four production order types.
However the 04 Inspection for the material is different depending on the Production Order Type, in terms of what to attributes to check for during inspection as well as the inspection frequency.
Essentially we need four different Quality Plans for the material, to satisfy the inspection regime for the material for each Production Order.
How can this be implement this in SAP that when the confirmation of the Production Order is undertaken that the correct Inspection Plan is assigned to the Inspection Lot for the Production Order?

Thanks and regards

Luke
PORTLAND
 
Posts: 6
Joined: Mon Apr 19, 2010 7:06 am

Re: 04 Inspection for Different Production Order Types

Postby Donk » Wed Aug 09, 2017 12:17 pm

Hi Luke,

Take a look at EXIT_SAPLQPAP_002 (enhancement QPAP0002). That should allow you to dynamically assign the correct plan based on your custom logic.

Thanks and regards,
John
Donk
 
Posts: 103
Joined: Fri Apr 13, 2007 1:00 pm
Location: OH

Re: 04 Inspection for Different Production Order Types

Postby PORTLAND » Tue Aug 15, 2017 5:41 pm

Hi John

Thanks for taking the time out to read my post and respond.
I will certainly look into your suggestion

Kind regards

Luke
PORTLAND
 
Posts: 6
Joined: Mon Apr 19, 2010 7:06 am


Return to Logistics QM

Who is online

Users browsing this forum: No registered users and 3 guests





loading...


This website is not affiliated with, sponsored by, or approved by SAP AG.