T.CODE OVM1 (V_160MVL)

Logistics : SD and its sub-modules (Inquires, Quotes, Order Entry, SIS, Sales Contacts, Dist. & Billing)

Moderators: Snowy, thx4allthefish, mike_ac, Lost Identity

Post Reply
balag
Posts: 57
Joined: Mon Jan 19, 2004 4:38 am
Location: Chennai
Contact:

T.CODE OVM1 (V_160MVL)

Post by balag » Wed Sep 04, 2013 7:43 pm

Hi,

I would like to add this message no "VL 089 Delivery group & is not complete" and im encountered with error "Enter a valid value".

Any thoughts how can i add this new message? Thanks.

Rgs,
Bala-g
bala-g

sumpler
Posts: 71
Joined: Mon Sep 22, 2008 3:45 am
Location: Moscow, Russia

Re: T.CODE OVM1 (V_160MVL)

Post by sumpler » Thu Sep 05, 2013 1:43 am

the list of possible values is read from the V_160MVL_SYS view. it's editable but warns you that 'These data are maintained by SAP. Changes to these data have the same status as a program modification'. Anyway I've added a random message with status E while it's W in the standard but it hasn't turned red during the program run. Suppose you won't have luck here but you can try.

Gothmog
Posts: 1951
Joined: Wed Sep 12, 2007 4:46 am
Location: Probably not home

Re: T.CODE OVM1 (V_160MVL)

Post by Gothmog » Thu Sep 05, 2013 3:48 am

For these message to have a different type depending on table T160M, the check must be coded in the program.
Adding a new message in this table is not sufficent, you must modify all this message occurences in standard programs...
68 74 74 70 3a 2f 2f 74 69 6e 79 75 72 6c 2e 63 6f 6d 2f 62 64 6f 37 6d 77 67

Post Reply