printing material document from CO15

Logistics : PP

Moderators: Snowy, thx4allthefish, Ha Tran

Post Reply
vaditya10
Posts: 89
Joined: Fri May 23, 2003 12:03 am
Location: India-New Delhi

printing material document from CO15

Post by vaditya10 » Fri Feb 13, 2009 2:29 pm

Hello
We need to print material document while confirming order through CO15.
In print control CO15 is allowed with indicator 1 for individual slip.
Movement tpe 101 has indicator for print.
Output type WF01 is having condition for WF that GR from production.
However while executing CO15, I am not able to trrigger Output Type. it still gives that out put type is not properly configured.
Any clue

ismeth
Posts: 15
Joined: Mon Jan 05, 2009 1:28 am
Location: Indonesia
Contact:

Re: printing material document from CO15

Post by ismeth » Mon Feb 16, 2009 4:42 am

Hi....

Please check your output ype in TCODE M706, Double click in output type WF01.
and then Go to tab default value,

if you want to immediately print in dispatch time try to choose Send immediately(when saving the application).
if you want print with transaction MB90 in dispatch time try to choose Send with application own transaction.

good luck.

vaditya10
Posts: 89
Joined: Fri May 23, 2003 12:03 am
Location: India-New Delhi

Re: printing material document from CO15

Post by vaditya10 » Mon Feb 23, 2009 9:26 am

Thanks Buddy
I was missing the assignmnet of correct Output event. for CO15 to print, output condition has to be WS.

Thanks

Post Reply