Maint Plan for FL based on counters in EQUI

Logistics : PM and its sub-modules & SM

Moderators: Snowy, thx4allthefish, PJA

Post Reply
YochaiC
Posts: 6
Joined: Mon Dec 05, 2016 8:26 am

Maint Plan for FL based on counters in EQUI

Post by YochaiC » Wed Dec 07, 2016 8:30 am

Hi all,
My customer requests that I create maint. plan for an FL on which 2 separate equipments (ex: generators) are installed (and occasionally removed/replaced), each with its own counter (ex: "operating hours").
They request that the maint plan be based on both counters, but always trigger the next call object based on the higher counter of the two.

any suggestions how to implement this?
i assume there is no standard solution, right?

tnx :-)

apc
Posts: 126
Joined: Mon Dec 02, 2002 11:09 pm

Re: Maint Plan for FL based on counters in EQUI

Post by apc » Tue Jan 03, 2017 8:04 pm

Hi YochaiC.
Just to clarify:
When the maint plan falls due, does the business want to have BOTH of the generators serviced at the SAME time ?
apc

YochaiC
Posts: 6
Joined: Mon Dec 05, 2016 8:26 am

Re: Maint Plan for FL based on counters in EQUI

Post by YochaiC » Thu Jan 05, 2017 4:23 am

Yes, that's exactly what they want.
thanks for your reply!

YochaiC
Posts: 6
Joined: Mon Dec 05, 2016 8:26 am

Re: Maint Plan for FL based on counters in EQUI

Post by YochaiC » Thu Jan 05, 2017 6:06 am

But just to be clear, the call object must be the FL upon which both EQ are installed...

YochaiC
Posts: 6
Joined: Mon Dec 05, 2016 8:26 am

Re: Maint Plan for FL based on counters in EQUI

Post by YochaiC » Sun Jan 15, 2017 10:54 am

any ideas, anyone? apc?

still haven't found a solution...

Post Reply