Partner Field as required entry field

Logistics : PM and its sub-modules & SM

Moderators: Snowy, thx4allthefish, PJA

Post Reply
ahreyes500
Posts: 63
Joined: Wed Dec 22, 2004 7:56 pm
Location: U.S

Partner Field as required entry field

Post by ahreyes500 » Fri Apr 22, 2011 8:55 am

We are on ECC 6.0 and have a requirement to validate that the Person Responsible field (I_PARNR) is filled in before SAVE (IW52) only when the System Status is set to NOCO. I looked into the Partner Determination config but it does not check for the system status. Do we need to do this validation through a User Exit? If so, which one would we need to use?

Thanks for your assistance.

PJA
Posts: 11383
Joined: Sun Jul 20, 2003 3:11 pm
Location: Deepest darkest Aberdeenshire
Contact:

Re: Partner Field as required entry field

Post by PJA » Fri Apr 22, 2011 9:50 am

You will need to develop a solution possibly via user-exit:
IWOC0002 PM/SM notification: Check whether status change is allowed
or
QQMA0030 Check validity of status change

PeteA

Post Reply