PR not getting transferred to sourcing cockpit

All postings related to SRM only

Moderators: Snowy, thx4allthefish

Post Reply
skm137
Posts: 16
Joined: Fri Feb 06, 2004 4:52 am
Location: India
Contact:

PR not getting transferred to sourcing cockpit

Post by skm137 » Wed Mar 02, 2011 2:14 am

Hi Dear,

We are in srm 7.0

Using start collective processing we are sending PR from ECC to SRM sourcing cockpit.

next when we look for the PR in Assign Sources of Supply it does not appear there.

What could be the probable reasons for the same.

Thanks in advance

sk

Fara786
Posts: 3
Joined: Tue Feb 21, 2012 7:41 am

Re: PR not getting transferred to sourcing cockpit

Post by Fara786 » Tue Feb 21, 2012 8:12 am

Hi SKM137,

This could be for many reasons.

1. Ensure that the PR complies to all the rules as specified by the code
2. Check if the PR is stuck in the queue on ECC (smq1)
3. Check if the PR is converted to a SHC on SRM (bbp_pd and enter the PR number in "External Requiement"). If the screen is blank after executing the PR is not on SRM. If the PR is on SRM ensure that a follow on document was not previously created.


The most common reason for a PR not appearing in the SOCO is because the PR was already used to create a follow on document.


Hope it helps. :D

Post Reply