Class characteristic linking to MIC

Logistics QM

Moderators: Snowy, thx4allthefish, Ha Tran

Post Reply
Posts: 1
Joined: Mon May 07, 2018 12:33 pm

Class characteristic linking to MIC

Post by nireferee » Mon May 07, 2018 1:50 pm

I have a specific quantitative class characteristic that is linked 1:1 to a MIC. The MIC is used in many inspection plans. I updated the class characteristic's number of characters from 2 to 3 and updated Char. Values from 0 - 99 to 0 - 999. I also made a minor update to the associated MIC to get a new version number. I ran QS61 to maintain material specifications. When updating an inspection plan (with a new version of the associated MIC), the data is not pulling the new value range for the lower and upper spec limits (it remains as the original range of 0 - 99).

Note: the MIC in the inspection plan is not unlocked.

Is it possible to get this to update from 0 - 99 to 0 - 999? Or do I need to create a new Class characteristic and associated MIC?


Post Reply