Page 1 of 1

Certificate of Analysis - QC22

PostPosted: Tue Feb 02, 2016 5:22 pm
by Shriks
Hi,
We are having an issue with printing COA using QC22. We print COAs for all materials using a profile which has Result Origin as " Inspection/Batch from Production Origin", Inspection Spec Origin : Material Spec from Production chain. The profile contains all the MICs used in all the Inspection Plans. The MICs are created as complete copy model characteristics. The scenario is : There are two materials whose inspection plans use the same MICs but with different specifications. For one material the COA is getting printed but for the other material it is not printing and generating the error "The data for batch XXXXXX PLNT XXXXXXX could not be printed". If the MIC is not maintained properly in the profile then it should not print for the other material also. The inspection characteristics in the Inspection plan are identical. Can anyone pls advise where else to look for the error.