This website is not affiliated with, sponsored by, or approved by SAP AG.

Inspection Lot for rework material

Logistics QM

Moderators: Snowy, thx4allthefish, Ha Tran

Inspection Lot for rework material

Postby tania1101 on Thu Dec 29, 2011 12:46 am

Hi All,

I have requirement that one inspection lot number can be used many times.

So when usage decision is made, the material need to be rework and then back to be check with the same inspection number because the user need the history of this inspection lot. So they need to know how many times the rework be done until all the material can be accepted.

Can this requirement be done in SAP? or do you have any other suggest to provide this thing?

Thanks a lot

tania1101
 
Posts: 5
Joined: Thu Dec 29, 2011 12:41 am

Re: Inspection Lot for rework material

Postby Robert524 on Tue Jan 03, 2012 8:29 pm

hi tania,

in my opinion, you could create inspection lots for rework material manually, in addition, you can enter the source inspection lot no. in the field QALS-KTEXTLOS, so you can count how many times the rework be done until all the material can be accepted according to field QALS-KTEXTLOS.

what do you think?
Last edited by Robert524 on Wed Jan 04, 2012 6:05 pm, edited 2 times in total.
Robert524
 
Posts: 1
Joined: Tue Jan 03, 2012 8:08 pm

Re: Inspection Lot for rework material

Postby tania1101 on Wed Jan 04, 2012 12:01 am

Hey thank u for ur reply. Can u explain it more spesific way? Thanks
tania1101
 
Posts: 5
Joined: Thu Dec 29, 2011 12:41 am

Re: Inspection Lot for rework material

Postby Craig on Fri Jan 06, 2012 9:15 am

You could use inspection points for this. Each inspection point would be considered rework.

Craig
Craig
 
Posts: 5504
Joined: Sun Oct 20, 2002 11:07 pm
Location: Heading back to the Milky Way...

Re: Inspection Lot for rework material

Postby tania1101 on Tue Jan 10, 2012 10:25 pm

Hi Craig, I've done the inspection point. So i create PRO with trigger point to create operation rework PP07 and i already activate the QM in that control key. How can i inspect the rework material?
tania1101
 
Posts: 5
Joined: Thu Dec 29, 2011 12:41 am

Re: Inspection Lot for rework material

Postby Craig on Wed Jan 11, 2012 5:20 am

You just go to the original inspection lot and create a new inspection point. You can create as many as you want.

Are you using 03 lots?

Craig
Craig
 
Posts: 5504
Joined: Sun Oct 20, 2002 11:07 pm
Location: Heading back to the Milky Way...

Re: Inspection Lot for rework material

Postby tania1101 on Wed Jan 11, 2012 6:11 pm

Thanks Craig.

YEAH True I'm using inspection type 03.

so first i have to inspect 10 pieces material. then i use confirmation yield 8 and rework 2.
then in the next inspection point i still can input 10 pieces right?
what i want is in the next inspection point user can only input result for the rework material.
Can i do that?
tania1101
 
Posts: 5
Joined: Thu Dec 29, 2011 12:41 am

Re: Inspection Lot for rework material

Postby Craig on Thu Jan 12, 2012 4:43 am

To be honest you'll have to try it.

None of my clients have ever done confirmations via the inspection lot. But I've always been in the chemical and pharm industries.

Craig
Craig
 
Posts: 5504
Joined: Sun Oct 20, 2002 11:07 pm
Location: Heading back to the Milky Way...

Re: Inspection Lot for rework material

Postby sap2000 on Wed Apr 11, 2012 4:27 pm

Hi Guys,

How to create the inspection point from inspection lot coz I am not seeing that feature in qa02? Do we have to go to a separate transaction or is it there in qa02?

thanks
Sap2000
sap2000
 
Posts: 215
Joined: Fri Aug 26, 2005 1:16 am

Re: Inspection Lot for rework material

Postby Craig on Thu Apr 12, 2012 7:49 am

If it's set up right, in QE51n you should see a line under the last results that says somehting like next point or new point or something like that. I can't remember off the top of my head and my current client doesn't use inspection points anywhere for me to even look.

Craig
Craig
 
Posts: 5504
Joined: Sun Oct 20, 2002 11:07 pm
Location: Heading back to the Milky Way...


Return to Logistics QM

Who is online

Users browsing this forum: Exabot [Bot] and 2 guests



This website is not affiliated with, sponsored by, or approved by SAP AG.