Spool output greater than 255 characters

Development (ABAP Development WorkBench, ABAP/4 programming)

Moderators: Snowy, thx4allthefish, YuriT, Gothmog

Post Reply
Arian
Posts: 1
Joined: Tue Apr 15, 2003 8:41 pm

Spool output greater than 255 characters

Post by Arian » Tue Apr 15, 2003 8:47 pm

If I run a report in the background that has more than 255 characters in the output, the spool cuts the output to 255 characters. An OSS Note has been applied to the system which created a new output format that allows for up to 380 characters of output in the spool. When I rerun the report, the TOP-OF-PAGE contents all get outputted in complete, but the data for the report (all WRITE statements after TOP-OF-PAGE) gets cut off at 255 characters. It works fine for an ALV report but it doesn't work for a regular WRITE statement report. Does anyone know why or how to fix this?

Jumanji
Posts: 23
Joined: Wed Feb 19, 2003 12:48 am
Location: Hyderabad, India

Post by Jumanji » Wed Apr 16, 2003 4:37 am

Hi Arian,

If u have executed the report using the 380 format and u know the spool number,I can give u a program which accepts the spool number and give the output of ur required wdth
here is the code:

*
* display spool list > 255 columns
*
* This is a SAP utility report to allow display of
* spool request lists with more than 255 columns in
* releases 4.6B and 4.6C (4.6D kernel must be used)
* SAPnet note: 186603
*
REPORT ZRSPOSHOWLIST LINE-SIZE 80.
PARAMETERS: RQIDENT LIKE TSP01-RQIDENT,
FIRSTL TYPE I DEFAULT 0,
LASTL TYPE I DEFAULT 0.

* global data from LSPOXTOP
DATA: RC(10) TYPE C,
ERRMSG(100) TYPE C,
STATUS LIKE SY-SUBRC,
DSN_TYPE(8) TYPE C.
DATA: BEGIN OF DATA_SET_LINE,
DATA_LENGTH(5),
PRECOL(1),
* DATA_LINE(1000),
DATA_LINE(5000), "MODAB
END OF DATA_SET_LINE,
DATA_SET_LENGTH(5) TYPE C.
TABLES: TSP01, TST05, TSPOPTIONS.
DATA: TEMSE_NAME LIKE TST01-DNAME,
TEMSE_CLIENT LIKE TST01-DCLIENT,
TEMSE_HANDLE LIKE RSTSTYPE-HANDLE,
TEMSE_PART LIKE TST01-DPART,
TEMSE_OBJTYP LIKE TST01-DTYPE,
TEMSE_RECTYP LIKE RSTSTYPE-RECTYP,
TEMSE_CHARCO LIKE TST01-DCHARCOD.
DATA: IS_OTF.
* global data from LSPOCTOP
DATA: BEGIN OF SPOC
* , escape
* , prtctrl
, FIRST_BYTES(4) " collection of the first bytes of the
" escape sequences, which I am searching for.

, PRTCTRL_START_LENGTH TYPE I
, PRTCTRL_TOTAL_LENGTH TYPE I
, PRTCTRL_START(10)

, SYMBOL_LOW_START(10)
, SYMBOL_HGH_START(10)
, SYMBOL_START_LENGTH TYPE I

, ICON_START(10)
, ICON_START_LENGTH TYPE I
, ICON_SEL TYPE I VALUE 1
, FRAME_START(10)
, FRAME_START_LENGTH TYPE I
, END OF SPOC.
FIELD-SYMBOLS: <SPOC_PRTCTRL> TYPE C
, <SPOC_FRAME> TYPE C
, <SPOC_ICON> TYPE C
, <SPOC_SYMBOL_LOW> TYPE C
, <SPOC_SYMBOL_HGH> TYPE C
.

* copied from RSPO_DISPLAY_ABAP_SPOOLJOB
DATA: BUFFER LIKE DATA_SET_LINE OCCURS 1000.
TABLES: TSP02L.

SELECT SINGLE * FROM TSP01 WHERE RQIDENT = RQIDENT.
IF SY-SUBRC <> 0.
WRITE: / 'Spool request does not exist:'(001), RQIDENT.
EXIT.
ENDIF.
CALL FUNCTION 'RSPO_CHECK_JOB_PERMISSION'
EXPORTING
ACCESS = 'DISP'
SPOOLREQ = TSP01
EXCEPTIONS
NO_PERMISSION = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
WRITE: / 'No authorization to display'(002).
EXIT.
ENDIF.

PERFORM READ_DATA TABLES BUFFER
USING TSP01 FIRSTL LASTL.
IF SY-SUBRC <> 0.
WRITE: / 'Error reading spoolo request'(003).
EXIT.
ENDIF.
IF IS_OTF = 'X'.
WRITE: / 'This spool request is not an ABAP list'(004).
EXIT.
ENDIF.
PERFORM DISPLAY_DATA TABLES BUFFER USING TSP01-RQPAPER TSP01-RQIDENT.

******************************************
FORM GET_SPOOL_LINE.
DO.
IF TEMSE_RECTYP+1(1) = 'Y'.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE
* ID 'BUFFLG' FIELD 1006
ID 'BUFFLG' FIELD 5006 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ELSE.
CALL 'C_RSTS_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'BUFF' FIELD DATA_SET_LINE+1
* ID 'BUFFLG' FIELD 1005
ID 'BUFFLG' FIELD 5005 "MODAB
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'SHOWLG' FIELD 'X'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
DATA_SET_LINE(5) = DATA_SET_LINE+1(5).
DATA_SET_LINE-PRECOL = ' '.
ADD 1 TO DATA_SET_LINE-DATA_LENGTH.
ENDIF.
STATUS = SY-SUBRC.
IF STATUS <> 6. " EOF, error condition, or got data
EXIT.
ENDIF.
* end of this part, try to open next part
ADD 1 TO TEMSE_PART.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS = 0.
CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT "hjl
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
* CREATER =
* CREDATE =
* DELDATE =
* MAX_CREDATE =
* MAX_DELDATE =
* NON_UNIQ =
* NOOF_PARTS =
RECTYP = TEMSE_RECTYP
* SIZE =
* STOTYP =
* type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.
STATUS = SY-SUBRC.
ENDIF.
IF STATUS = 0.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
ENDIF.
ENDDO.
IF STATUS = 4.
STATUS = 12. "EOF
ENDIF.
IF STATUS = 8.
STATUS = 40. "Line too long
ENDIF.
DATA_SET_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDFORM.


FORM READ_DATA TABLES BUFFER
USING TSP01 LIKE TSP01 VALUE(FIRST) TYPE I
VALUE(LAST) TYPE I.
DATA: LINES TYPE I.

REFRESH BUFFER.
CLEAR IS_OTF.

TEMSE_CLIENT = TSP01-RQCLIENT.
TEMSE_NAME = TSP01-RQO1NAME.
TEMSE_PART = 1.

CALL FUNCTION 'RSTS_GET_ATTRIBUTES'
EXPORTING
AUTHORITY = 'SP01'
CLIENT = TEMSE_CLIENT
NAME = TEMSE_NAME
PART = TEMSE_PART
IMPORTING
CHARCO = TEMSE_CHARCO
* CREATER =
* CREDATE =
* DELDATE =
* MAX_CREDATE =
* MAX_DELDATE =
* NON_UNIQ =
* NOOF_PARTS =
RECTYP = TEMSE_RECTYP
* SIZE =
* STOTYP =
* type =
OBJTYPE = TEMSE_OBJTYP
EXCEPTIONS
FB_ERROR = 1
FB_RSTS_OTHER = 2
NO_OBJECT = 3
NO_PERMISSION = 4
OTHERS = 5.

IF SY-SUBRC = 0.
IF TEMSE_OBJTYP(3) = 'OTF'.
IS_OTF = 'X'.
ENDIF.
ELSE.
EXIT.
ENDIF.

CLEAR TEMSE_HANDLE.
CALL 'C_RSTS_OPEN_READ'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'CLIENT' FIELD TEMSE_CLIENT "hjl
ID 'NAME' FIELD TEMSE_NAME
ID 'PART' FIELD TEMSE_PART
ID 'TYPE' FIELD TEMSE_OBJTYP
ID 'CONV' FIELD ' '
ID 'ALLINE' FIELD 'X'
ID 'BINARY' FIELD ' '
ID 'RECTYP' FIELD TEMSE_RECTYP
ID 'CHARCO' FIELD TEMSE_CHARCO
ID 'PROM' FIELD 'I'
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.

IF STATUS = 0.

DO.
PERFORM GET_SPOOL_LINE.
IF STATUS <> 0 AND STATUS <> 40 AND STATUS <> 12.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF STATUS <> 12. " 12 = End
IF NOT ( DATA_SET_LENGTH IS INITIAL ).
DATA_SET_LINE-DATA_LENGTH = DATA_SET_LENGTH - 1.
ENDIF.
ADD 1 TO LINES.
IF LINES >= FIRST.
APPEND DATA_SET_LINE TO BUFFER.
ENDIF.
IF ( NOT LAST IS INITIAL ) AND ( LINES >= LAST ).
EXIT.
ENDIF.
ELSE.
IF LINES = 0.
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
IF LINES < FIRST .
PERFORM CLOSE_JOB.
EXIT.
ENDIF.
EXIT.
ENDIF.
ENDDO.
PERFORM CLOSE_JOB.
ENDIF.
ENDFORM.


*---------------------------------------------------------------------*
* FORM CLOSE_JOB *
*---------------------------------------------------------------------*
* ........ *
*---------------------------------------------------------------------*
FORM CLOSE_JOB.
IF STATUS <> 0 AND STATUS <> 12.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
CALL 'C_RSTS_CLOSE'
ID 'HANDLE' FIELD TEMSE_HANDLE
ID 'RC' FIELD RC
ID 'ERRMSG' FIELD ERRMSG.
STATUS = SY-SUBRC.
IF STATUS <> 0.
MESSAGE E112(PO) WITH STATUS RC ERRMSG RAISING READ_ERROR.
ENDIF.
ENDFORM.


FORM DISPLAY_DATA TABLES BUFFER USING RQPAPER LIKE TSP01-RQPAPER
RQID LIKE TSP01-RQIDENT.
DATA: LINE_LENGTH TYPE I, GCOL TYPE I, GLINES TYPE I,
LINE_LENGTH2 LIKE RSTSTYPE-LINELENGTH,
V, V2.

* CALL FUNCTION 'RSPO_SPOOLDATA_WRITE_INIT'.
PERFORM SPOOLDATA_WRITE_INIT. "MODAB
* select single * from tspoptions where spoption = 'REALWIDTH'.
* if sy-subrc = 0.
V = 'X'.
* endif.
* select single * from tspoptions where spoption = 'REALHEIGHT'.
* if sy-subrc = 0.
V2 = 'X'.
* endif.
IF NOT V IS INITIAL OR NOT V2 IS INITIAL.
GCOL = 0.
GLINES = 0.
SELECT SINGLE * FROM TSP02L WHERE PJIDENT = RQID
AND PJNUMMER = 0.
IF SY-SUBRC = 0.
GCOL = TSP02L-COLUMNS.
GLINES = TSP02L-LINES.
ELSE.
CALL FUNCTION 'RSPO_GET_SIZE_OF_LAYOUT'
EXPORTING
LAYOUT = RQPAPER
IMPORTING
* ANSWER =
COLUMNS = GCOL
LINES = GLINES
* PFORMAT =
.
ENDIF.
ENDIF.
IF GCOL < 80 OR V IS INITIAL.
GCOL = 255.
ENDIF.
IF GLINES < 5 OR V2 IS INITIAL.
GLINES = 0.
ENDIF.
IF GCOL >= 1024. "MODAB
GCOL = 1023.
ENDIF.
NEW-PAGE NO-HEADING NO-TITLE LINE-SIZE GCOL
LINE-COUNT GLINES. " make a wide list
SET BLANK LINES ON.

LOOP AT BUFFER.
DATA_SET_LINE = BUFFER.
IF DATA_SET_LINE-PRECOL = 'P'.
IF DATA_SET_LINE(1) = ' '. " Echter Vorschub ?"
NEW-PAGE.
ENDIF.
CONTINUE.
ENDIF.
* Zeilenlänge berechnen, falls unbekannt.
IF DATA_SET_LINE-DATA_LENGTH IS INITIAL.
LINE_LENGTH = STRLEN( DATA_SET_LINE-DATA_LINE ).
ELSE.
LINE_LENGTH = DATA_SET_LINE-DATA_LENGTH.
ENDIF.

IF LINE_LENGTH > 0.
LINE_LENGTH2 = LINE_LENGTH.
PERFORM SPOOLDATA_WRITE USING DATA_SET_LINE-DATA_LINE "MODAB
LINE_LENGTH2
1.
ELSE.
" Leerzeile
SKIP.
ENDIF.
ENDLOOP.
ENDFORM.

* copied from RSPO_SPOOLDATA_WRITE
FORM SPOOLDATA_WRITE USING VALUE(SPOOL_DATA)
VALUE(DATA_LENGTH) LIKE RSTSTYPE-LINELENGTH
VALUE(START_POS) LIKE SY-COLNO.
* function globals
DATA: LPOS LIKE SY-COLNO
, REST_LEN TYPE I
, AREA_LEN TYPE I
, NEXT_HOT TYPE I " offset of next special character
, COLS TYPE I " columns used by special character
, BYTES TYPE I " bytes used by special character
, HOT2
, HOT3
, HOT4
, HOT5
, HOT6
, HOT7
, BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
, THE_PRTCTRL(5) TYPE C
* Because of a problem within the ABAP listprocessing, I shall
* never output the same icon side by side with the same color
* and without a gap.
* As I don't know the data, I will use two different variables
* alternatively.
, ICON_ID1 LIKE ICONS-L4
, ICON_ID2 LIKE ICONS-L4.
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
, <HOT_PRTCTRL>
, <HOT_FRAME>
, <HOT_ICON>
, <HOT_SYMBOL>
.

IF START_POS < 2.
* write at / ' ' no-gap.
NEW-LINE.
LPOS = 1.
ELSE.
LPOS = START_POS.
ENDIF.

REST_LEN = STRLEN( SPOOL_DATA ).
DESCRIBE FIELD SPOOL_DATA LENGTH AREA_LEN.
IF DATA_LENGTH = 0.
" fine.
ELSEIF DATA_LENGTH <= AREA_LEN.
REST_LEN = DATA_LENGTH.
ELSE.
WRITE: / 'Fehler beim Decodieren der Listendaten'(005).
STOP.
ENDIF.

CHECK REST_LEN > 0.

ASSIGN SPOOL_DATA(REST_LEN) TO <LDATA>.

WHILE <LDATA> CA SPOC-FIRST_BYTES.
NEXT_HOT = SY-FDPOS.
IF NEXT_HOT > 0.
ASSIGN <LDATA>(NEXT_HOT) TO <PLAIN_TEXT>.
* MODAB
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
NEXT_HOT
LPOS.
* WRITE AT LPOS <PLAIN_TEXT> NO-GAP.
ADD NEXT_HOT TO LPOS.
SUBTRACT NEXT_HOT FROM REST_LEN.
ASSIGN <LDATA>+NEXT_HOT(REST_LEN) TO <LDATA>.
ENDIF.
IF REST_LEN >= SPOC-PRTCTRL_START_LENGTH.
ASSIGN <LDATA>(SPOC-PRTCTRL_START_LENGTH) TO <HOT_PRTCTRL>.
ELSE.
ASSIGN 'too_short' TO <HOT_PRTCTRL>.
ENDIF.
IF REST_LEN >= SPOC-FRAME_START_LENGTH.
ASSIGN <LDATA>(SPOC-FRAME_START_LENGTH) TO <HOT_FRAME>.
ELSE.
ASSIGN 'too_short' TO <HOT_FRAME>.
ENDIF.
IF REST_LEN >= SPOC-ICON_START_LENGTH.
ASSIGN <LDATA>(SPOC-ICON_START_LENGTH) TO <HOT_ICON>.
ELSE.
ASSIGN 'too_short' TO <HOT_ICON>.
ENDIF.
IF REST_LEN >= SPOC-SYMBOL_START_LENGTH.
ASSIGN <LDATA>(SPOC-SYMBOL_START_LENGTH) TO <HOT_SYMBOL>.
ELSE.
ASSIGN 'too_short' TO <HOT_SYMBOL>.
ENDIF.

IF REST_LEN > 1.
HOT2 = <LDATA>+1(1).
IF REST_LEN > 2.
HOT3 = <LDATA>+2(1).
IF REST_LEN > 3.
HOT4 = <LDATA>+3(1).
ELSE.
HOT4 = '?'.
ENDIF.
ELSE.
HOT3 = '?'.
ENDIF.
ELSE.
HOT2 = '?'.
ENDIF.

IF <HOT_FRAME> = <SPOC_FRAME>.
COLS = 1. " in most cases.
BYTES = 2. " in most cases.
CASE HOT2.
WHEN '0'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '1'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '2'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '3'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '4'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '5'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '6'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '7'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '8'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN '9'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ':'. WRITE AT LPOS HOT2 AS LINE NO-GAP.
WHEN ';'. " box_drawings_light_left
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '<'. " box_drawings_light_up
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '='. " box_drawings_light_right
WRITE AT LPOS '4' AS LINE NO-GAP.
WHEN '>'. " box_drawings_light_down
WRITE AT LPOS '5' AS LINE NO-GAP.
WHEN '?'. " drawings_checkbox_off
WRITE AT LPOS ' ' AS CHECKBOX INPUT OFF NO-GAP.
WHEN '@'. " drawings_checkbox_on
WRITE AT LPOS 'X' AS CHECKBOX INPUT OFF NO-GAP.
WHEN OTHERS.
BYTES = 0.
ENDCASE.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_LOW>.
ESCAPE_TRICK = HOT3.
SUBTRACT 32 FROM ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_SYMBOL> = <SPOC_SYMBOL_HGH>.
ESCAPE_TRICK = HOT3.
ADD 32 TO ESCAPE_TRICK-X1.
IF HOT4 = SPACE.
WRITE AT LPOS(2) ESCAPE_TRICK AS SYMBOL NO-GAP.
COLS = 2.
BYTES = 4.
ELSE.
WRITE AT LPOS(1) ESCAPE_TRICK AS SYMBOL NO-GAP.
BYTES = 3.
ENDIF.
ENDIF.
IF <HOT_ICON> = <SPOC_ICON>.
IF SPOC-ICON_SEL >< 1.
SPOC-ICON_SEL = 1.
ICON_ID1 = '@00@'.
ICON_ID1+1(1) = HOT3.
ICON_ID1+2(1) = HOT4.
ELSE.
SPOC-ICON_SEL = 2.
ICON_ID2 = '@00@'.
ICON_ID2+1(1) = HOT3.
ICON_ID2+2(1) = HOT4.
ENDIF.
IF REST_LEN > 4.
HOT5 = <LDATA>+4(1).
IF REST_LEN > 5.
HOT6 = <LDATA>+5(1).
IF REST_LEN > 6.
HOT7 = <LDATA>+6(1).
ELSE.
HOT7 = '?'.
ENDIF.
ELSE.
HOT6 = '?'.
ENDIF.
ELSE.
HOT5 = '?'.
ENDIF.
IF HOT5 = SPACE.
IF HOT6 = SPACE.
IF HOT7 = SPACE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(4) ICON_ID1 AS ICON.
* write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(4) ICON_ID2 AS ICON.
* write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 4.
BYTES = 7.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(3) ICON_ID1 AS ICON.
* write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(3) ICON_ID2 AS ICON.
* write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 3.
BYTES = 6.
ENDIF.
ELSE.
IF SPOC-ICON_SEL = 1.
WRITE AT LPOS(2) ICON_ID1 AS ICON.
* write at lpos icon_id1 as icon no-gap.
ELSE.
WRITE AT LPOS(2) ICON_ID2 AS ICON.
* write at lpos icon_id2 as icon no-gap.
ENDIF.
COLS = 2.
BYTES = 5.
ENDIF.
ELSE.
"rite at lpos(1) icon_id as icon.
WRITE AT LPOS(1) '#' NO-GAP. " Not enough space for any icon.
COLS = 1.
BYTES = 4.
ENDIF.
ENDIF.

IF <HOT_PRTCTRL> = <SPOC_PRTCTRL>.
COLS = 0. " in most cases.
BYTES = 6. " in most cases.
IF REST_LEN >= SPOC-PRTCTRL_TOTAL_LENGTH.
THE_PRTCTRL = <LDATA>+SPOC-PRTCTRL_START_LENGTH(5).
IF THE_PRTCTRL = 'SABLD'.
FORMAT INTENSIFIED ON.
"no 3.0 'SAULN'.
"no 3.0 FORMAT UNDERSCORED ON.
ELSEIF THE_PRTCTRL = 'SAOFF'.
FORMAT INTENSIFIED OFF.
"no 3.0 FORMAT UNDERSCORED OFF.
ELSEIF THE_PRTCTRL(3) = 'COL'.
CASE THE_PRTCTRL+3(1).
WHEN '0'.
FORMAT COLOR OFF.
WHEN '1'.
FORMAT COLOR 1.
WHEN '2'.
FORMAT COLOR 2.
WHEN '3'.
FORMAT COLOR 3.
WHEN '4'.
FORMAT COLOR 4.
WHEN '5'.
FORMAT COLOR 5.
WHEN '6'.
FORMAT COLOR 6.
WHEN '7'.
FORMAT COLOR 7.
ENDCASE.
CASE THE_PRTCTRL+4(1).
WHEN 'N'.
FORMAT INTENSIFIED OFF INVERSE OFF.
WHEN 'H'.
FORMAT INTENSIFIED ON INVERSE OFF.
WHEN 'V'.
FORMAT INTENSIFIED ON INVERSE ON.
ENDCASE.
ENDIF. "printcontrol
ELSE. "??
ENDIF.
ENDIF.

IF BYTES = 0.
BYTES = 1.
WRITE AT LPOS(1) '#'.
COLS = 1.
ENDIF.

ADD COLS TO LPOS.
SUBTRACT BYTES FROM REST_LEN.
IF REST_LEN > 0.
ASSIGN <LDATA>+BYTES(REST_LEN) TO <LDATA>.
ELSE.
EXIT.
ENDIF.
ENDWHILE.
* MODAB
IF REST_LEN > 0.
ASSIGN <LDATA>(REST_LEN) TO <PLAIN_TEXT>.
PERFORM WRITE_BIGFIELD USING <PLAIN_TEXT>
REST_LEN
LPOS.
ENDIF.
ENDFORM.

FORM WRITE_BIGFIELD USING VALUE(FIELD) TYPE C
VALUE(LEN)
VALUE(POS).
FIELD-SYMBOLS <P>.
DATA: CHUNK TYPE I.

WHILE LEN > 0.
IF LEN > 255.
CHUNK = 255.
ELSE.
CHUNK = LEN.
ENDIF.
WRITE AT POS FIELD(CHUNK) NO-GAP.
ADD CHUNK TO POS.
LEN = LEN - CHUNK.
IF LEN > 0.
FIELD = FIELD+CHUNK.
ENDIF.
ENDWHILE.
ENDFORM.

FORM SPOOLDATA_WRITE_INIT.
DATA: BEGIN OF ESCAPE_TRICK
, X1(1) TYPE X
, END OF ESCAPE_TRICK
.
FIELD-SYMBOLS: <LDATA>
, <PLAIN_TEXT>
, <PRTCTRL>
.


ESCAPE_TRICK-X1 = '1C'.
SPOC-PRTCTRL_START = ESCAPE_TRICK.
SPOC-PRTCTRL_START_LENGTH = 1.
SPOC-PRTCTRL_TOTAL_LENGTH = SPOC-PRTCTRL_START_LENGTH + 5.
ASSIGN SPOC-PRTCTRL_START(SPOC-PRTCTRL_START_LENGTH) TO <SPOC_PRTCTRL>.

ESCAPE_TRICK-X1 = '1B'.
SPOC-FRAME_START = ESCAPE_TRICK.
SPOC-FRAME_START_LENGTH = 1.
ASSIGN SPOC-FRAME_START(SPOC-FRAME_START_LENGTH) TO <SPOC_FRAME>.

ESCAPE_TRICK-X1 = '1B'.
SPOC-ICON_START = ESCAPE_TRICK.
SPOC-ICON_START+1 = ','.
SPOC-ICON_START_LENGTH = 2.
ASSIGN SPOC-ICON_START(SPOC-ICON_START_LENGTH) TO <SPOC_ICON>.

ESCAPE_TRICK-X1 = '1B'.
SPOC-SYMBOL_LOW_START = ESCAPE_TRICK.
SPOC-SYMBOL_LOW_START+1 = '('.
SPOC-SYMBOL_HGH_START = ESCAPE_TRICK.
SPOC-SYMBOL_HGH_START+1 = ')'.
SPOC-SYMBOL_START_LENGTH = 2.
ASSIGN SPOC-SYMBOL_LOW_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_LOW>.
ASSIGN SPOC-SYMBOL_HGH_START(SPOC-SYMBOL_START_LENGTH)
TO <SPOC_SYMBOL_HGH>.

SPOC-FIRST_BYTES+0(1) = SPOC-PRTCTRL_START(1).
SPOC-FIRST_BYTES+1(1) = SPOC-FRAME_START(1).
SPOC-FIRST_BYTES+2(1) = SPOC-ICON_START(1).
SPOC-FIRST_BYTES+3(1) = SPOC-SYMBOL_LOW_START(1).
ENDFORM.

Jumanji
Posts: 23
Joined: Wed Feb 19, 2003 12:48 am
Location: Hyderabad, India

Post by Jumanji » Wed Apr 16, 2003 4:50 am

some part of the above code has been replaced by an emoticon.
i forgot to disable smilies.
it is in the 13th line and it is

DSN_TYPE(8) TYPE C.

btw it is actually a note. just to save the time i have given the whole code

bye

ordogi
Posts: 14
Joined: Fri Oct 24, 2003 2:19 pm

Post by ordogi » Fri Apr 20, 2007 8:17 am

Thank you for your code!
It was usefull so thank you again!!!
Andras :P
-----------------------------------------
Best regards
ordogi

Dr Sidewalk
Posts: 3531
Joined: Mon Oct 21, 2002 11:06 am
Location: Everywhere...

...

Post by Dr Sidewalk » Tue Apr 24, 2007 1:54 am

Change your LINE-SIZE parameter. Regardless of your WRITE statement you will not get output greater than this parameter. Of course if you set it to anything less than 255 I think it just defaults to 255.
I thought I read that ALV output is okay, therefore I assume that your printer/spool details are configured to handle wide output. This is the next most common problem.

So, set your line-size param to something like 500 but also need to ensure that this does not exceed the printer queue width.


Dr Sidewalk
"In the middle of difficulty lies opportunity" - Albert Einstein
"Money isn't everything in life, unless you don't have it"
"Fail to plan, plan to fail"
"Success is a journey, not a destination."

Post Reply