Can not connect to sap server

Basis (Basis Technology Modules: Basis Component/System Administration, GUIs)

Moderators: Snowy, thx4allthefish

Post Reply
aveev
Posts: 14
Joined: Wed Mar 14, 2012 11:52 pm

Can not connect to sap server

Post by aveev » Wed May 02, 2012 3:44 am

Hi,I'm quite new sap so mind for this newbie question :)
I try to connect to sap server from starbuck, but I cannot connect to

sap server. The error message is:
partner ip_addres:sapdp00 not reached
Resource temporarily available.
And here are some additional error messages.

Component : NI (Network Interface)
Release : 710
Module : nibuf.cpp
Return code: -10
Error no : 10035

I try to connect to sap server from my home using internet broadband,

and I find no problem..
What would be the cause?
Is it because poor signal ?
Any help would be greatly appreciated.
Thanks

Snowy
Posts: 28790
Joined: Mon Oct 21, 2002 2:33 pm
Location: 3.1415926535

Re: Can not connect to sap server

Post by Snowy » Fri May 04, 2012 8:14 am

Hi,

what is the IP address of your server?

is this a home SAP installation? If so, it is normal, you won't be able to connect.

Also, next time, bring me a Venti Vanilla Latté please.

aveev
Posts: 14
Joined: Wed Mar 14, 2012 11:52 pm

Re: Can not connect to sap server

Post by aveev » Wed May 23, 2012 4:27 am

Hi.. Snowy .. sorry for a very late response...:)
Btw, thks for your advice.
I think it was because of poor signal.. This time, I can connect through sap server from the same place...
the connection is so unstable..:)..
cheers...

Snowy
Posts: 28790
Joined: Mon Oct 21, 2002 2:33 pm
Location: 3.1415926535

Re: Can not connect to sap server

Post by Snowy » Thu May 24, 2012 6:51 am

Where's my Latté? :mrgreen:

toddbeck911
Posts: 1
Joined: Fri Aug 10, 2012 3:46 am

Re: Can not connect to sap server

Post by toddbeck911 » Fri Aug 10, 2012 3:53 am

Hey Snowy.... This issue usually occurs due to a weak wi fi signal or poor network connection. Please check for the same..

Post Reply