Setup CTS in MiniSap 6.2

Basis (Basis Technology Modules: Basis Component/System Administration, GUIs)

Moderators: Snowy, thx4allthefish

Post Reply
kewlii
Posts: 1
Joined: Sat Mar 28, 2009 12:50 pm

Setup CTS in MiniSap 6.2

Post by kewlii » Wed Apr 01, 2009 10:17 pm

I am using MiniSap 6.2 trail version and I am trying to setup the CTS. I am able to follow the directions from various websites(they all have same steps) up to the point after I did this step: Configuration -> Standard configuration -> Single system. The next step is Create a transport layer. I just cannot find the "create transport layer" button anywhere on the menu. Can someone please help me with this step, or point me to a link where I can find the correct instructions if the one I was reading was incorrect? Thank you.

Tinuviel
Posts: 1069
Joined: Fri Sep 09, 2005 8:05 pm

Re: Setup CTS in MiniSap 6.2

Post by Tinuviel » Sun Apr 05, 2009 9:09 pm

While you are in change mode, right-click on the transport routes line and click create.

Post Reply