This website is not affiliated with, sponsored by, or approved by SAP AG.

Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Basis (Basis Technology Modules: Basis Component/System Administration, GUIs)

Moderators: Snowy, thx4allthefish

Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Postby metalfreak on Thu Apr 10, 2008 10:37 pm

Hi guys...

My report is having a short dump after execution...the data extraction are all fine but...it terminates after that.

Information on where terminated
Termination occurred in the ABAP program "SAPLOLEA" - in "AC_SYSTEM_FLUSH".
The main program was "ZREPORT_NAME ".

In the source code you have the termination point in line 29
of the (Include) program "LOLEAU02".


----------------------------------------------------------------------------------------------------
|Source Code Extract |
----------------------------------------------------------------------------------------------------
|Line |SourceCde |
----------------------------------------------------------------------------------------------------
| 1|FUNCTION AC_SYSTEM_FLUSH . |
| 2|*"---------------------------------------------------------------------- |
| 3|*"*"Lokale Schnittstelle: |
| 4|*" IMPORTING |
| 5|*" VALUE(CALLED_BY_SYSTEM) TYPE C OPTIONAL |
| 6|*" EXCEPTIONS |
| 7|*" CNTL_SYSTEM_ERROR |
| 8|*" CNTL_ERROR |
| 9|*"---------------------------------------------------------------------- |
| 10| data: sysubrc like sy-subrc. |
| 11| |
| 12| CALL FUNCTION 'AC_FLUSH_CALL' |
| 13| EXPORTING |
| 14| SYSTEM_FLUSH = 'X' |
| 15| CALLED_BY_SYSTEM = CALLED_BY_SYSTEM |
| 16| IMPORTING |
| 17| MESSAGE_NR = sysubrc |
| 18| MESSAGE_TEXT = SY-MSGLI. |
| 19| |
| 20| sy-subrc = sysubrc. |
| 21| |
| 22| CASE SY-SUBRC. |
| 23| WHEN 0. |
| 24| WHEN 1. |
| 25|* system_error |
| 26| MESSAGE ID 'CNDP' TYPE 'X' NUMBER 007 RAISING CNTL_SYSTEM_ERROR. |
| 27| WHEN 2. |
| 28|* method_call_error |
|>>>>>| MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR. |
| 30| WHEN 3. |
| 31|* property_set_error |
| 32| MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR. |
| 33| WHEN 4. |
| 34|* property_get_error |
| 35| MESSAGE ID 'CNDP' TYPE 'X' NUMBER 006 RAISING CNTL_ERROR. |
| 36| WHEN OTHERS. |
| 37| RAISE CNTL_ERROR. |
| 38| ENDCASE. |
| 39| |
| 40|ENDFUNCTION.


I've been searching around abit and they said it has got to do with SAPGUI version.

Please advice on what version should I be updating at least?

Currently this is my SAPGUI version

Release: 640 Final Release
File Name: sapfront.dll
File Version: 6405.5.21.3024
Build: 855417
Patch Level: 21

metalfreak
 
Posts: 18
Joined: Fri May 11, 2007 2:45 am

Re: Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Postby Snowy on Fri Apr 11, 2008 1:38 am

maybe3 the abapper needs to check, this is a Z program calling a SAP standard program:

ZREPORT_NAME
SapFans Moderator

Search: http://www.sapfans.com/forums/search.php
Notes: http://service.sap.com/notes
Help: http://help.sap.com
Rules: http://www.sapfans.com/forums/viewtopic.php?t=344127
Snowy
 
Posts: 28650
Joined: Mon Oct 21, 2002 2:33 pm
Location: 3.1415926535

Re: Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Postby metalfreak on Sun Apr 13, 2008 3:24 pm

Hi Snowy,

But looking the program, the error happens after processing has been done.

All i understand from the pain program is, it creates instances for the ALV tree, does the data preparations...and then display.

But the shortdump is after the program tries to load the ALV tree. The program is not returning any error though.
metalfreak
 
Posts: 18
Joined: Fri May 11, 2007 2:45 am

Re: Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Postby Tinuviel on Sun Apr 13, 2008 3:26 pm

Snowy is right, you need to push this back to whoever created this copy of the original report. If that is you, you need to take this to the ANAP forum.
Tinuviel
 
Posts: 1069
Joined: Fri Sep 09, 2005 8:05 pm

Re: Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Postby metalfreak on Sun Apr 13, 2008 5:25 pm

Code: Select all

*&---------------------------------------------------------------------*
*&      Module  STATUS_9000  OUTPUT
*&---------------------------------------------------------------------*
*       text
*----------------------------------------------------------------------*
MODULE status_9000 OUTPUT.
  SET PF-STATUS 'STATUS'.


  IF gor_tree IS INITIAL.

    " The Tree Control has not been created yet.
    " Create a Tree Control and insert nodes into it.


*---------------------------------------------------------------------*
*------------- create a container for the tree control----------------*
*---------------------------------------------------------------------*

    CREATE OBJECT gw_custom_container
      EXPORTING
        " the container is linked to the custom control with the
        " name 'TREE_CONTAINER' on the dynpro
        container_name = 'C_CONTAINER'
      EXCEPTIONS
        cntl_error = 1
        cntl_system_error = 2
        create_error = 3
        lifetime_error = 4
        lifetime_dynpro_dynpro_link = 5.


    IF gw_container2 IS INITIAL.

      CREATE OBJECT gw_container2
        EXPORTING
*          I_SHELLSTYLE      = 0
*          I_LIFETIME        =
          i_parent          = gw_container1
*          I_APPL_EVENTS     = space
*          I_PARENTDBG       =
*          I_APPLOGPARENT    =
*          I_GRAPHICSPARENT  =
*          I_NAME            =
*          I_FCAT_COMPLETE   = SPACE
*        EXCEPTIONS
*          ERROR_CNTL_CREATE = 1
*          ERROR_CNTL_INIT   = 2
*          ERROR_CNTL_LINK   = 3
*          ERROR_DP_CREATE   = 4
*          others            = 5
          .

*---------------------------------------------------------------------*
*---------------------------------- Set grid title--------------------*
*---------------------------------------------------------------------*



      CONCATENATE gc_orgmodel '-' p_scen '-' gc_orgstruc INTO gw_result  SEPARATED BY space.

      gs_layout-grid_title = gw_result.

      CALL METHOD gw_container2->set_table_for_first_display
        EXPORTING
*            I_BUFFER_ACTIVE               =
*            I_BYPASSING_BUFFER            =
*            I_CONSISTENCY_CHECK           =
*              i_structure_name              = 'GT_DUMMY'
*            IS_VARIANT                    =
*            I_SAVE                        =
*            I_DEFAULT                     = 'X'
          is_layout                     = gs_layout
*            IS_PRINT                      =
*            IT_SPECIAL_GROUPS             =
*            IT_TOOLBAR_EXCLUDING          =
*            IT_HYPERLINK                  =
*            IT_ALV_GRAPHICS               =
*            IT_EXCEPT_QINFO               =
*            IR_SALV_ADAPTER               =
        CHANGING
          it_outtab                     = gt_dummy[]
          it_fieldcatalog               = gt_cat.
*            IT_SORT                       =
*            IT_FILTER                     =
*          EXCEPTIONS
*            INVALID_PARAMETER_COMBINATION = 1
*            PROGRAM_ERROR                 = 2
*            TOO_MANY_LINES                = 3
*            others                        = 4

    ENDIF.

*---------------------------------------------------------------------*
*----------------- create a list tree control------------------------*
*---------------------------------------------------------------------*

    CREATE OBJECT gor_tree
    EXPORTING
      parent                       = gw_custom_container
      node_selection_mode          = cl_gui_list_tree=>node_sel_mode_single
      item_selection               = 'X'
      with_headers                 = ' '
    EXCEPTIONS
      cntl_system_error           = 1
      create_error                = 2
      failed                      = 3
      illegal_node_selection_mode = 4
      lifetime_error              = 5.
  ENDIF.

*This part is where all the data gets compiled etc etc
*DATA PREPARTION
*

  CALL METHOD gor_tree->add_nodes_and_items
    EXPORTING
      node_table                     = gt_node_table
      item_table                     = gt_item_table
      item_table_structure_name      = 'MTREEITM'
    EXCEPTIONS
      failed                         = 1
      cntl_system_error              = 3
      error_in_tables                = 4
      dp_error                       = 5
      table_structure_name_not_found = 6.

ENDMODULE.                 " STATUS_9000  OUTPUT

metalfreak
 
Posts: 18
Joined: Fri May 11, 2007 2:45 am

Re: Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Postby metalfreak on Mon Apr 14, 2008 4:52 am

Guys I've tried upgrading my SAPGUI but the error still appears

MAIN MODULE INFORMATION:
Name............: sapfront.dll
Description.....: SAP Frontend for Windows
Product version.: 710 Final Release
File version....: 7100.1.0.3050
Build number....: 885068

Please advice
metalfreak
 
Posts: 18
Joined: Fri May 11, 2007 2:45 am

Re: Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Postby metalfreak on Fri Nov 07, 2008 11:04 am

Whoa, sorry for the long absence


I manage to solve this one. It was due to the duplicate data found in the internal table which was causing the error. Nothing to do with SAP GUI for my case.

many thanks
metalfreak
 
Posts: 18
Joined: Fri May 11, 2007 2:45 am

Re: Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Postby kprocope on Wed Jan 23, 2013 8:02 am

Hi

I am having the same problem with the dumps and i tried installing 730 and it still displayed the error message.
Can you indicate the name of the internal table where the duplicate data was stored so i could check and delete it as well.

Thanks much.


kathy
kprocope
 
Posts: 2
Joined: Wed Jan 23, 2013 7:49 am

Re: Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Postby kprocope on Wed Jan 23, 2013 12:07 pm

Good Day

I am having the same problem and i installed the latest version of SAP 730 and the problem still exist.

Can you tell me the name of the internal table where you deleted the duplicate instance/data for it to work please.

Thanks much

Kathy
kprocope
 
Posts: 2
Joined: Wed Jan 23, 2013 7:49 am

Re: Error: Message_TYPE_X, SAPLOLEA Related. Please advice.

Postby Gothmog on Thu Jan 24, 2013 3:58 am

metalfreak hasn't visited here for four years - how about you start a new topic for your specific problem?
Locked for necroposting, please read the forum's rules.
68 74 74 70 3a 2f 2f 74 69 6e 79 75 72 6c 2e 63 6f 6d 2f 62 64 6f 37 6d 77 67
Gothmog
 
Posts: 1668
Joined: Wed Sep 12, 2007 4:46 am
Location: Probably not home


Return to Basis

Who is online

Users browsing this forum: No registered users and 4 guests



This website is not affiliated with, sponsored by, or approved by SAP AG.