This website is not affiliated with, sponsored by, or approved by SAP AG.

replacing AMT with value of NUM in wage type

Human Resources (PM, OM, PA, TM ,PD)

Moderators: Snowy, thx4allthefish, muhnkee_2

Post Reply
majids71
Posts: 54
Joined: Thu Jan 06, 2011 4:54 am

replacing AMT with value of NUM in wage type

Post by majids71 » Wed Jan 14, 2015 7:15 am

Hi All,

I have both NUM and AMT in a wage type. i need the value in AMT to be replaced with NUM.

Which operation do I need to use to do the above. Please advise

Thank you in advance

Majid

SAPHER
Posts: 6
Joined: Wed Nov 05, 2003 9:27 am
Location: Poland

Re: replacing AMT with value of NUM in wage type

Post by SAPHER » Wed Jan 21, 2015 1:14 pm

There is maybe another way but I usually do such thing:
AMT=1
MULTI ANA
Now you will have the same value in AMT like in NUM.
--------------------------
SAPHeR

jgunja
Posts: 2
Joined: Sun Feb 08, 2015 7:02 am
Location: Sydney, Australia

Re: replacing AMT with value of NUM in wage type

Post by jgunja » Sun Feb 08, 2015 6:30 pm

If you don't want any value in NUM, then after
AMT=1
MULTI ANA

include the following:
NUM=0

You will have the same value in AMT as it was in NUM prior to this PCR. Also NUM value is removed.
Further after the above, you need following op.
ADDWT *

Now the output of the PCR is as noted above. Otherwise, whatever changes you have made are available in the w/t within the PCR after the above changes.

Post Reply